Mavercade Lightweight buy Fightstick Enclosure - Sega 2P Ext All Clear Acrylic Panels

*This is an enclosure only. Joystick, buttons, PCB, USB ports, and cabling are not included and will need to be purchased separately. Pictures are representation of fully assembled cases with the additional parts*

Save on an already pre-cut and ready to ship enclosure. Button layout is a Sega 2P Ext with all panels clear. You choose the color of the corners.

Acrylic joystick / fight stick enclosure. Assembly required.

What is included:
-Acrylic panels, machine screws, standoffs with 3D supports, and rubber feet.
-Brook PCB mounting holes and mounting hardware included.

Features:
-Top, Bottom, and Side panels are 6mm in total thickness, made from 2x 3mm premium Cast Acrylic
-3D printed corner supports with embedded standoffs for stronger support. Available in black, white, blue, light blue, green, yellow, and grey
-Panels are protected with masks on both sides
-Supports Sanwa JLF joystick and some K-levers (indicate which joystick you have for correct measurements)
-Supports 30mm and 24mm Snap-in or Screw-on buttons
-3x 24mm button holes on the left and right side of the enclosure, snap-in or screw-on
-Side buttons are slightly recessed to avoid accidental button pressing when handling case
-Countersunk holes for all facing screws

*NEW* - Have your artwork printed and laser cut for your enclosure. Select the "+ Art" option in the dropdown field and send me a message for the art template.

Case Templates are available for artwork! Working on the public links, but in the meantime send a message for a link.

Dimensions:
Fully assembled: 40cm x 19.7cm x 6.6cm / 15.75" x 7.75" x 2.5"
Side walls: 1.75" tall (2" available)
Weight: 1.3Kg / 2.8lbs

Recommended parts to complete your build:
-Brook PCB or PCB of your choice
-Neutrik USB port. USB-B to A recommended. (not needed for certain Brook PCBs)
-Joystick buy and Buttons
-20pin connector cable to connect joystick and buttons to the PCB
-4pin L3/R3/TP connect cable for side buttons
-Short printer cable to connect Neutrik to PCB (USB-B to A)
-Long printer cable to connect Neutrik to Console/PC (USB-B to A)
-if purchasing a 20pin kit, you may need a joystick extension connector