The Nixie Tube Driver Board is designed to simplify the making of a Nixie tube clock.
Connect an Arduino (or other MCU) board, a NCH6300HV (HV power supply) and 4 nixie tubes to the Board, and that's pretty much it.
Of course you'll need a few bells and whistles, like buttons, an RTC module, and some wires, but the heavy-lifting work buy has been done for you, all on the NTDB Board. And we also provide the Arduino example code to get you started. Isn't it easy enough?
Arduino Library (Open Source)
https://github.com/Omnixie/Nixie-Tube-Driver-Board-Arduino-Library
We provide Arduino Library and Example Code
Easy to make a nixie tube clock
Nixie Tube Driver Board (NTDB) KIT for 4 Nixie tubes includes:
1x Nixie Tube Driver Board
1x Power Switch (Panel-mount)
1x Power Socket (Panel-mount), with a split washer and a nut.
3x Tactile Buttons (Panel-mount)
4x Board-to-Wire for Nixie Tubes (11 conductors, Red for the anode, and Blue for all cathodes)
1x Board-to-Wire for colons (3 conductors, Red for the anode, and Blue for 2 colons)
No power supply included.
Dimension: 140x30x15mm (L x W x H), or, 5.52x1.18x0.59 inches.
15mm is the thickness of the thickest component, the wire header.
For technical details, please refer to our Wiki page:
https://www.omnixie.io/doku.php/projects/ntdb4/ntdb4_introduction
Product code: Nixie Tube Driver Board buy (NTDB4) KIT for 4 Nixie tubes from Omnixie