7 NICKEL 30-06 Bullet Cupboard Door Handles, Bullet Cabinet Door Handles, Bullet buy Drawer Knob Pulls, Home Decor

This listings is for a quantity of seven (7) Bullet Cabinet Door Handles

Bullet Handles are handmade using an authentic 30-06 nickel rifle case and an emptied factory copper bullet. There is no live primers and the colour of the used primers will vary (brass or nickel).

* Holes are approx 1 1/2" center to center
* Overall length is approx 3 1/4" long
* Inside Height is approx 3/4" (where your fingers fit to pull open)
* Handles can be mounted vertically or horizontally
* Mounting hardware included; each handle comes with two machine screws

These are designed to install on 9/16" thick cupboard door/drawer. The 8-32 x 1 1/2" machine screws (supplied) requires approx. a 3/16" to 7/32" hole to accommodate the bolt and allow for adjustment.

I also offer a longer 8-32 machine screw at 1 3/4" long.

Do not over tighten screws when installing.

Bullet Handles are made entirely of nickel plated components so they will stay shiny and require very little cleaning.

TIP: If you currently have only have one door knob, you may want to mount this handle in a vertical position, so you can use the existing hole in your cabinet door.

My Bullet Handles are buy hand crafted, not poured metal. They are designed for lightweight door/drawers ONLY. They are not fragile, but they are not indestructible, care has to be taken due to the nature of its unique design.

For all Bullet Handles, or to purchase additional quantities, refer to https://www.etsy.com/shop/EverythingBullets?section_id=22500035

Additional pictures are for display purposes only.